Caring For Your New Seamless Rain Gutter System

If you are in the market for new gutters for your home, you have likely considered investing in a seamless rain gutter system as this type is known to have a reduction in leakage occur. Caring for your gutter system regularly is important so it remains in the best of condition year after year.

Take The Time To Check And Remove Debris Accumulation

While seamless gutters do an exceptional job at whisking water away from your home's roof area, you still need to monitor the contents inside of them regularly. Debris tends to accumulate in gutters that do not have protective tops in place. This is caused by animal placement, precipitation, and wind. Get on a ladder at least once or twice a year and peer into the gutters to see if there is debris present. If so, remove it while wearing gloves so your skin is protected in the process. If you are unable to tend to the task on your own, contact a local roofing service for assistance.

Check That Water Is Not Pooling In One Location

A gutter system that has become altered because of excessive weight or debris accumulation will not divert water properly. If water does not appear to be streaming from the downspouts attached to your seamless gutter system, there is either an obstruction present or the system is not completely straight. Check for debris first. If there is none present, the gutters may have become bent and the pitch is not set properly for water removal. Use a level to determine whether your gutter system needs some alteration. This can be done by moving its brackets and reinstalling them so the gutters allow for water flow once again.

Handle Damaged Areas Without Delay

If a portion of a seamless water system becomes damaged, you may notice water dripping from an area where it is not supposed to do so. This requires immediate repair in order for the system to work as it should. Check the interior of the gutter where the water is noticed spilling out of it. If there is a crack or hole noticed, a quick patch job can be conducted using a piece of flashing. Insert the metal piece inside of the gutter and secure it into place using caulk. Allow to dry and test the system by pouring some water inside. If it still seeps out of the gutter, contact a professional for an assessment, as a new piece of gutter may be needed to repair the system properly.